diff --git a/README.md b/README.md
index 5e192f4..53befc1 100644
--- a/README.md
+++ b/README.md
@@ -74,6 +74,66 @@ set keeps the default.
 Both files are needed — `theme.toml` points at the `.tmTheme` for syntax
 highlighting in file previews.
 
+## Sharper previews (optional)
+
+Not part of the colour scheme, but it belongs in the same corner of
+`~/.config/yazi` — the files are under `preview/`.
+
+```sh
+cp preview/yazi.toml ~/.config/yazi/yazi.toml
+cp -r preview/plugins/pdf-hidpi.yazi ~/.config/yazi/plugins/
+ya cache clear
+```
+
+### Why PDFs look mushy by default
+
+Two bottlenecks stack up:
+
+1. Yazi calls `pdftoppm` **without `-r`**, so pages render at poppler's 150 DPI
+   default — an A4 page is 1241x1754 px.
+2. `[preview] max_width` / `max_height` default to **600x900**. The page is
+   squeezed to 600 px wide and then scaled back up to fill the pane.
+
+On top of that the page is JPEG-compressed at quality 75, which smears glyph
+edges.
+
+`preview/yazi.toml` raises the cap to 1600x2400, and the `pdf-hidpi` plugin is
+Yazi's own PDF previewer with two changes: `-r 300` and PNG instead of JPEG.
+The page now renders at 2481x3508 and is downscaled into the cap, so the result
+is supersampled rather than upscaled — and lossless where the glyphs are.
+
+**Both the previewer and the preloader must be overridden.** They write the
+same cache file, so replacing only one leaves the 150 DPI version in place.
+`preview/yazi.toml` does both.
+
+Yazi has no zoom. What it has is `J` / `K`, which turn PDF pages in the
+preview, and whatever key you bound to maximise the preview pane.
+
+### Videos
+
+The video preview is **one still frame** by design: `ffmpeg` pulls a keyframe
+at 5 % of the runtime and Yazi shows it as an image. Nothing animates, and no
+setting changes that.
+
+What does work:
+
+| Key | |
+|---|---|
+| `J` / `K` | scrub the preview through the file, ±5 % per press |
+| `Tab` | spot panel — codec, resolution, duration |
+| `Enter` / `o` | open in an mpv window |
+| `O` | pick an opener — including **Play here (Kitty)** |
+
+The last one is the `[opener]` block in `preview/yazi.toml`: it runs
+`mpv --vo=kitty --vo-kitty-use-shm=yes`, which draws the video into the
+terminal pane through the Kitty graphics protocol. Yazi blocks until mpv
+exits (`q`). Shared-memory transfer keeps it watchable; without it every frame
+goes through the tty as base64 and it crawls. It is still a terminal doing a
+framebuffer's job — fine for checking what a clip is, not for watching it.
+
+Defining `play` replaces Yazi's preset list rather than merging into it, which
+is why mpv appears twice there: once windowed, once inline.
+
 ## Keeping the icon table current
 
 The `[icon]` block **replaces** Yazi's preset table wholesale. Icons added by
@@ -91,6 +151,11 @@ script prints which Gruvbox tone each source colour landed on.
 `regen-tmtheme.py` does the same for `gruvbox-dark.tmTheme` — edit the palette
 or the scope rules at the top of the script and re-run it.
 
+Both generators and the `pdf-hidpi` plugin target the **26.9** plugin API. If
+you build against Yazi's `main` branch instead of the tag you run, you will hit
+renamed functions — `fs.cha()` was `fs.stat()` on main — and the error only
+surfaces at preview time.
+
 ## Self-contained
 
 Everything needed is in this repository — nothing has to be fetched from a
diff --git a/preview/plugins/pdf-hidpi.yazi/main.lua b/preview/plugins/pdf-hidpi.yazi/main.lua
new file mode 100644
index 0000000..7b873b0
--- /dev/null
+++ b/preview/plugins/pdf-hidpi.yazi/main.lua
@@ -0,0 +1,73 @@
+-- pdf-hidpi: like Yazi's built-in `pdf` previewer, but renders at a higher
+-- resolution and as PNG instead of JPEG.
+--
+-- The built-in one calls `pdftoppm` without `-r`, so pages come out at
+-- poppler's 150 DPI default (A4 = 1240x1754) and are then JPEG-compressed.
+-- On a large or a portrait pane that is not enough pixels for body text, and
+-- JPEG ringing around glyphs makes it worse.
+--
+-- Rendering above the target size and letting `image_precache` downscale gives
+-- a supersampled, much sharper result. PNG keeps glyph edges clean.
+--
+-- Raise DPI for even sharper text at the cost of render time and cache size.
+
+local DPI = 300
+
+local M = {}
+
+function M:peek(job)
+	local start, cache = os.clock(), ya.file_cache(job)
+	if not cache then
+		return
+	end
+
+	local ok, err, bound = self:preload(job)
+	if bound and bound > 0 then
+		return ya.emit("peek", { bound - 1, only_if = job.file.url, upper_bound = true })
+	elseif not ok or err then
+		return ya.preview_widget(job, err)
+	end
+
+	ya.sleep(math.max(0, rt.preview.image_delay / 1000 + start - os.clock()))
+
+	local _, err = ya.image_show(cache, job.area)
+	ya.preview_widget(job, err)
+end
+
+function M:seek(job)
+	local h = cx.active.current.hovered
+	if h and h.url == job.file.url then
+		local step = ya.clamp(-1, job.units, 1)
+		ya.emit("peek", { math.max(0, cx.active.preview.skip + step), only_if = job.file.url })
+	end
+end
+
+function M:preload(job)
+	local cache = ya.file_cache(job)
+	if not cache or fs.cha(cache) then
+		return true
+	end
+
+	-- stylua: ignore
+	local output, err = Command("pdftoppm")
+		:arg({
+			"-f", job.skip + 1,
+			"-l", job.skip + 1,
+			"-singlefile",
+			"-r", DPI,
+			"-png",
+			tostring(job.file.path), tostring(cache),
+		})
+		:output()
+
+	if not output then
+		return true, Err("Failed to start `pdftoppm`, error: %s", err)
+	elseif not output.status.success then
+		local pages = job.skip > 0 and tonumber(output.stderr:match("the last page %((%d+)%)"))
+		return true, Err("Failed to convert PDF to image, stderr: %s", output.stderr), pages
+	end
+
+	return ya.image_precache(Url(cache .. ".png"), cache)
+end
+
+return M
diff --git a/preview/yazi.toml b/preview/yazi.toml
new file mode 100644
index 0000000..2fa14ef
--- /dev/null
+++ b/preview/yazi.toml
@@ -0,0 +1,38 @@
+#:schema https://yazi-rs.github.io/schemas/yazi.json
+
+[preview]
+# Yazi caps every rendered preview image at these pixel dimensions before
+# showing it. The default 600x900 is well below what the preview pane is worth
+# on a large or a portrait screen, so PDFs and images arrive already
+# downscaled and then get upscaled again — that is the blur.
+max_width  = 1600
+max_height = 2400
+
+# Applies to the JPEGs the video previewer produces (PDFs go through pdf-hidpi
+# below, which renders PNG and ignores this).
+image_quality = 90
+
+[plugin]
+# Replace the built-in PDF previewer with a high-resolution variant.
+# Both entries are needed: the preloader fills the same cache file the
+# previewer reads, so overriding only one of them leaves the 150 DPI version
+# in place.
+prepend_previewers = [
+	{ mime = "application/pdf", run = "pdf-hidpi" },
+]
+prepend_preloaders = [
+	{ mime = "application/pdf", run = "pdf-hidpi" },
+]
+
+[opener]
+# Replaces the preset's `play` list (a list defined here is not merged).
+# Audio and video use it via the built-in `[open]` rule for {audio,video}/*.
+play = [
+	# Enter / o — normal mpv window.
+	{ run = "mpv %s",             desc = "Play (mpv)",         for = "unix", orphan = true },
+	# O, then pick — plays inside this terminal via the Kitty graphics
+	# protocol. Blocks Yazi until mpv exits; q quits.
+	{ run = "mpv --vo=kitty --vo-kitty-use-shm=yes %s", desc = "Play here (Kitty)", for = "unix", block = true },
+	# Yazi's preset also offers mediainfo here; Tab (spot) already shows
+	# codec, resolution and duration, so it is left out.
+]